Categories

Polyurethane Paint

PRIMER

Kossan 2K PU Primer PUP 2K01-Series

PUP-2K-01 is a fast curing 2K PU primer which pigmented with non-toxic anticorrosive pigments it provides excellent adhesion, leveling properties and easy sand ability properties.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

TOP COAT

Kosurethane Finish HS (PUF 3060)

An aliphatic polyurethane high solids topcoat with excellent gloss and colour retention. It offers a tough, durable coating with good resistance against the spillage of oils and chemicals. It can be applied at a dry film thickness up to 100 micron in a single coat without affecting gloss properties.

Product Datasheet
Material Safety Datasheet

Kosurethane Varnish PUV 3000

A highly durable, two-pack polyurethane clear vanish suitable for interior and exterior exposure. It provides excellent gloss and gloss retention, when cured it formed a very tough and durable coating with good resistance against the spillage of oil and chemicals, is has excellent flow properties and provides a brilliant elastic firm.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Kosurethane Varnish PUV-3050

A highly durable, two-pack polyurethane clear vanish suitable for interior and exterior exposure. It provides excellent gloss and gloss retention, when cured it formed a very tough and durable coating with good resistance against the spillage of oil and chemicals, is has excellent flow properties and provides a brilliant elastic firm. This product is suitable to use on exterior rod iron steel, wood, or pebble wash floor varnish and etc.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transurethane Finish 3.43

An aliphatic, acrylic based polyurethane topcoat for all areas above the waterline. The product provides excellent durability and offers superior gloss and colour retention.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Kossan 2K Anti-Sticker Paint ASP-2K01-CB

ASP-2K01-CB is a 2K Anti-Sticker Paint which special develop to provides an effective anti-sticker on steel, galvanized steel, wood, fiberglass, concretes, and cement surfaces it prevent from sticky glue, sticker, bird nesting and etc.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

What is Polyurethane Paint Malaysia?

A polyurethane coating or also known as PU paint in Malaysia is a layer of polyurethane that acts as a protective layer when applied to a material’s surface. The PU coating can protect the base material from abrasion, corrosion, harsh weathering and other processes that would degrade the material over time.

Polyurethane coatings also considered being strong and durable while providing exceptional wear resistance. The coating can be glossy or muted and can be transparent or opaque. It also can be ductile and soft, so that the base material is allowed to stretch without ruining the coating.

The PU coating is not flammable, so they often used for some situation where the combustion is occurring in the same environment. Thus, proper care should be taken to limit the overexposure of polyurethane coating to ultraviolet light as it could cause the coating to degrade.

Polyurethane coatings are notable for the high ability to adhere remarkably to a wide variety of base materials. Many of the polyurethane coatings do not require additional processing to cure. It can merely apply and cure upon exposure to the moisture in the air.

Moreover, the polyurethane coating also commonly used for many different applications, especially to the wooden floor. Since the coating can be waterproof and have high abrasion resistance, this makes them an excellent choice for this application. It also can be used to apply on metal and top of other coatings as well.

The Benefits of PU Paint Coating

There are abundant benefits of adding the polyurethane finish to building exteriors. Here are the top three reasons why polyurethane paint has become the best finish for your building surfaces.

1. Provide Great Protection

The polyurethane finishes combined with epoxy primers essentially create a smooth protective barrier on any surface they are applied to. The barrier is virtually impenetrable to atmospheric elements such as moisture, ultra-violet light, salt. So, the protection layer from the coating will keep the weathering elements from the materials when applied.

2. High Versatility

When polyurethane finish combined with an epoxy primer, it can be applied on almost every type of material. It can be used effectively on the steel structural, non-ferrous metals or even on engineered plastic systems. The high versatility of polyurethane is one of the reasons why it has become widely used as a coating material in all manner of construction, including adhesives, coatings and sealants.

3. Safety & Application

Polyurethane is made from the natural molecules known as monomers. After it has cured, it does not emit any harmful vapours. So, it is more environmentally friendly and safe for people and animals.

Besides, the polyurethane finishes are advised to be applied by experienced applicators who have the proper knowledge, skills and equipment to successfully and safely apply the polyurethane finishes.