Categories

Epoxy Flooring

Transpoxy Primer 1.16

A two pack polyamide cured epoxy primer with non-toxic pigments for the protection of steel structures against corrosion in industrial and marine environments. The primer can be used as a tiecoat on inorganic zinc silicates. Overcoating with a wide range of Transocean products.

Product Datasheet
Pack A: Material Safety Datasheet
Pack B: Material Safety Datasheet

Transpoxy ZP Primer 1.61

A two pack polyamide cured epoxy coating pigmented with zincphosphate and auxiliary anti-corrosive pigments for the protection of steel structures against corrosion. The products can be used as a primer or intermediate coat in Transpoxy systems.

Product Datasheet

Transpoxy M.I.O Primer 1.65

A two-pack polyamide cured epoxy coating pigmented with micaceous iron oxide. The product offers good resistance against abrasion and impact. The cured coating provides an excellent barrier against penetration of water and watervapour. The product can be used as a primer or intermediate coat in Transpoxy systems. The product offers resistance against dry heat up to 200°C.

Product Datasheet
Pack A: Material Safety Datasheet
Pack B: Material Safety Datasheet

Transpoxy HS Primer 1.81

A high solids epoxy coating pigmented with zincphosphate. Transpoxy HS Primer offers excellent durability and corrosion resistance. The product complies with the UK-Highway Agency coating specifications for bridges. It can be recoated with various Transpoxy or Transurethane systems.

Product Datasheet

Transpoxy Sealer 1.99

A two-pack polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is used as an intermediate coat in Transpoxy systems and as a sealer/tiecoat on inorganic zinc silicates.

Product Datasheet
Pack A: Material Safety Datasheet
Pack B: Material Safety Datasheet

Transozinc Epoxy Primer ST 1.50

A two pack epoxy primer pigmented with zinc dust for an excellent protection of steel structures against corrosion in industrial and marine environments. The primer is especially recommended when (ultra) high-pressure hydroblasting is utilized as surface preparation. The product also tolerates Sa2- and St3 prepared substrates.

Product Datasheet
Pack A: Material Safety Datasheet
Pack B: Material Safety Datasheet

Transoplate Epoxy Primer 1.57

A two pack epoxy shopprimer pigmented with non-toxic pigments for the protection of steel structures against corrosion during construction The primer is quick drying and can be used as a holding primer. The product has the Lloyds certificate for shopprimers.

Product Datasheet
Pack A: Material Safety Datasheet
Pack B: Material Safety Datasheet

Transozinc Epoxy Primer SP 1.59

A single pack epoxy shopprimer pigmented with a high zinc content for the protection of steel structures against corrosion during construction. The primer is quick drying and has the Lloyds certificate for shopprimers. The product can be used for maintenance of zinc silicate coated substrates.

Product Datasheet
Material Safety Datasheet

Tranpoxy Zinc Rich Primer 1.79

A zinc rich, epoxy primer formulated to give quick drying in order to be used with automatic spray equipment. It provides excellent anticorrosive properties on metal surfaces under marine and industrials environtment . This product can be overcoated with various Transpoxy Finish 4.60 or Transurethane Finish products.

Product Datasheet
Pack A: Material Safety Datasheet
Pack B: Material Safety Datasheet

Transpoxy Tar AA 2.12

A polyamine cured coal tar epoxy coating designed for use on areas where maximum water resistance , abrasion and chemical resistance is required. Recommended for underwater areas of marine-, offshore- and stationary structures of both steel and concrete. It has the Lloyds approval for corrosion control.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Barrier 2.18

A high solids epoxy barrier coating with excellent anticorrosive properties and good impact- and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. It can be recoated with various Transocean finishing systems.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Intermediate 2.19

A polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is especially suitable as an intermediate coat between organic- and inorganic zinc-rich primers and the final topcoat. Can be recoated with all Transocean Finishing series.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transvinypox HS 2.06

A two-pack, modified epoxy designed as a tiecoat or sealer on epoxy anticorrosive systems in order to improve the adhesion of subsequent antifouling systems. It can also be recoated with other Transocean finishing systems making it therefore a perfect second coat in a keel-to-rail anticorrosive system.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Glascote 4.40

A high solids glassflake epoxy coating with outstanding chemical and abrasion resistance. Especially suitable for areas facing severe corrosive conditions such as in splash zone areas.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Finish 4.60

A epoxy topcoat for interior and exterior use. Good resistance against weathering and the spillage of solvents, lubricants and chemicals. Transpoxy Finish cures to a tough and flexible coating and provides excellent adhesion to Transpoxy priming systems.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy TankGuard 4.61

A polyamine cured phenolic epoxy coating with excellent resistance against most acids, alkalis and various solvents. The product has good flow properties resulting in a smooth, easy to clean surface and therefore reduces the possibility of cargo adsorption.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Deep Tanks 4.62

A polyamine cured epoxy coating with excellent resistance against organic and inorganic acids, alkalis and various solvents. The product complies with FDA §175.300 for the carriage of dry foodstuffs.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Masterbond 4.66

A high solids epoxy primer/coating pigmented with aluminium flakes to enhance water resistance properties. Excellent corrosion- and impact resistance and good weathering characteristics. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. Complies with bridge coatings specifications of the UK-Highway Agency.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Masterbond 4.67

A high solids epoxy primer/coating formulated with Masterbond binder technology. Transpoxy Masterbond has excellent anticorrosive properties and good impact- and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings.

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Transpoxy Hydro Finish 4.70

A polyamide cured epoxy coating with excellent resistance against fresh water and seawater. The coating has very good flexibility and cured quickly. Together with Transpoxy Hydro Primer 1.70 it forms a system that may be used for water tanks.

Product Datasheet
Pack A: Material Safety Datasheet
Pack B: Material Safety Datasheet

Transpoxy TankGuard 4.71

A solventfree, polyamine cured epoxy coating with excellent resistance against alkalis, diluted inorganic acids and various solvents. The product is especially suitable for carriage of wine and other low-alcoholic spirits (alcohol content <20%).

Product Datasheet
Part A: Material Safety Datasheet
Part B: Material Safety Datasheet

Epoxy Flooring Paint Malaysia

Epoxy flooring is usually used for industrial and commercial flooring. The epoxy coatings are commonly applied over the concrete floors, which provides a high smooth, durable and high-performance surface that can last for many years while withstanding heavy loads.

In fact, many industrial sites, commercial buildings and warehouses are relying on epoxy floor paint to maintain a clean and safe working environment for workers, equipment and inventory.

Preparation of Epoxy Floor Paint

Epoxy paint typically requires a clean and slightly porous surface to adhere properly. Epoxy could not bond to sealed or polished the concrete. The concrete itself must be fully cured. Before applying the epoxy coating, it is crucial to patch and repair all major chips and cracks in the surface of concrete and remove all the grease.

Before applying the epoxy paint, ensure that the temperature was in optimal condition, and follow all the recommendations from the manufacturer. An unfavourable temperature could cause the epoxy coating to peel and bubble. Epoxy paint is a two-part liquid that you mix before application. Once the product is mixed, you have to apply the epoxy coating instantly before it starts to harden.

Moreover, the ease of application and thickness of the epoxy paint also depends on the volume of solids content. If the percentage of solids epoxy is 100%, that means you have 100% of the product on the floor after it cures. On the other way around, 50% solids mean you will have 50% of the product remaining on the floor after it has cured. The reasons for this are that the carrier agent like solvents or water, which are commonly used in the lower solid product, will evaporate out as the epoxy cures.

The Advantages of Epoxy Floor Coating

The price of epoxy paint might differ from each of the manufacturers in Malaysia, the majority of the functions and advantages are pretty much the same. Besides, the epoxy floor coatings have much more advantages when compared to other coatings when applied over the concrete: